Hoggan Scientific

ergoFET 500 lb. Push/Pull Force Gauge

$1,343.00

ergoFET 500 lb. Push/Pull Force Gauge (5065) 

Free Shipping in the Continental US

Leadtime approx. 2 weeks

The Hoggan Scientific ergoFET500 Push & Pull Dynamometer, is a cost-effective, durable and easy to use push pull force gauge designed for a wide variety of force measurement applications. It measures up to 500 pounds and is capable of peak force, untimed average force, or timed 3-second average force measurements. ergoFET500 is excellent for job site analysis or clinical use (e.g., static strength testing, FCE). View PDF of ergoFET500 data sheet.

Specifications

  • 500 lb Capacity
  • Rugged machined aluminum housing withstands heavy use in industrial settings
  • Attractive professional look and design
  • Can be used for a wide variety of force measurement applications, including peak force, or a 3 second averaged force
  • Highly accurate internal load cell
  • Easy to use and operate
  • Large, easy to read crystal LCD display
  • Dimensions: 6" L X 3" W x 13/8" H
  • Weight: less than one lb.
  • Displays real time force and peak force
  • Offers two operation test modes: Un-timed test mode: Record and display peak force and an average force for tension or compression and Timed (Static Strength Test) Mode: Record and display peak force and a 3 second average force over the last three seconds of a five second exertion for tension or compression
  • 4 selectable threshed settings – 2 low and 2 high settings; Low setting #1 Tension at 1.5 lbs, compression at 0.6 lbs, Low setting #2 Tension at 5.0 lbs, compression at 2.0 lbs, Low setting #1 Tension at 10.0 lbs, compression at 4.0 lbs, Low setting #2 Tension at 15.0 lbs, compression at 6.0 lbs
  • Measure and display peak force in pounds, newtons or kilograms
  • Maximum force capacity for tension – 500 lbs, in 0.5 lb increments
  • Maximum force capacity for compression – 200 lbs, in 0.2 lb. Increments
  • Sampling Rate: 100 samples per second
  • Auto power shut-off to extend battery life

Optional Upgrade Available! (software & interface box)

  • Software provides for the recording, storage and recall of force tests performed. The software screen displays average force, time, peak force and force/time curve of current test completed and generates force graphs for analyzing data
  • Interface box to allow for the transmission of data from load cell to PDA with software

 

 

Full Description

ergoFET 500 lb. Push/Pull Force Gauge (5065) 

Free Shipping in the Continental US

Leadtime approx. 2 weeks

The Hoggan Scientific ergoFET500 Push & Pull Dynamometer, is a cost-effective, durable and easy to use push pull force gauge designed for a wide variety of force measurement applications. It measures up to 500 pounds and is capable of peak force, untimed average force, or timed 3-second average force measurements. ergoFET500 is excellent for job site analysis or clinical use (e.g., static strength testing, FCE). View PDF of ergoFET500 data sheet.

Specifications

  • 500 lb Capacity
  • Rugged machined aluminum housing withstands heavy use in industrial settings
  • Attractive professional look and design
  • Can be used for a wide variety of force measurement applications, including peak force, or a 3 second averaged force
  • Highly accurate internal load cell
  • Easy to use and operate
  • Large, easy to read crystal LCD display
  • Dimensions: 6" L X 3" W x 13/8" H
  • Weight: less than one lb.
  • Displays real time force and peak force
  • Offers two operation test modes: Un-timed test mode: Record and display peak force and an average force for tension or compression and Timed (Static Strength Test) Mode: Record and display peak force and a 3 second average force over the last three seconds of a five second exertion for tension or compression
  • 4 selectable threshed settings – 2 low and 2 high settings; Low setting #1 Tension at 1.5 lbs, compression at 0.6 lbs, Low setting #2 Tension at 5.0 lbs, compression at 2.0 lbs, Low setting #1 Tension at 10.0 lbs, compression at 4.0 lbs, Low setting #2 Tension at 15.0 lbs, compression at 6.0 lbs
  • Measure and display peak force in pounds, newtons or kilograms
  • Maximum force capacity for tension – 500 lbs, in 0.5 lb increments
  • Maximum force capacity for compression – 200 lbs, in 0.2 lb. Increments
  • Sampling Rate: 100 samples per second
  • Auto power shut-off to extend battery life

Optional Upgrade Available! (software & interface box)

  • Software provides for the recording, storage and recall of force tests performed. The software screen displays average force, time, peak force and force/time curve of current test completed and generates force graphs for analyzing data
  • Interface box to allow for the transmission of data from load cell to PDA with software

 

 

Current Stock:
GTIN: 5065
SKU: 5065
Warranty: Standard Warranty – Included
One Year Parts and Labor
One Free Calibration (Shipping Not Included)

Gold Warranty - $195
Two Years Parts and Labor
Two Free Calibrations (Shipping Not Included)
One Year Software Updates (Must purchase software package with product and warranty.)

Platinum Warranty - $295
Three Years Parts and Labor
Three Free Calibrations (Shipping Not Included)
Two Year Software Updates (Must purchase software package with product and warranty.)